summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
* jig edge dsub connnarrowKevin Wallace6 days
|
* fix jig pitch 2mm->2.54mmKevin Wallace7 days
|
* don't set vehicle or mounting plate numberKevin Wallace8 days
| | | | | The system seems to retain these from the last "real" mounting plate it was attached to, and TestMode works without FzgParam present.
* automount mp_sd by label in addition to pathKevin Wallace10 days
| | | | | | | | | By default, the system will automount /dev/disk/by-path/platform-ci_hdrc.1-usb-0:1.3:1.0-scsi-0:0:0:0-part1 but this won't work if there's a USB hub in the picture. If there's no disk at that path, this will additionally try to mount a disk with label "MP_SD".
* move usb port down a tiny bit for mounting plate clearanceKevin Wallace11 days
|
* pth thermal reliefs on gnd fill for better solderabilityKevin Wallace11 days
|
* 24LC64 decoupling capKevin Wallace11 days
|
* glasgow i2c eeprom programming jigKevin Wallace12 days
|
* fmtKevin Wallace12 days
|
* i2c eeprom flash scriptKevin Wallace13 days
|
* silkscreen, gnd viaKevin Wallace14 days
|
* i2c eeprom addr is 0x50 -> addrsel all gndKevin Wallace2025-12-26
|
* add i2c eeprom. but what address???Kevin Wallace2025-12-24
|
* fix MT3608 footprint rotation to match jlcKevin Wallace2025-12-23
|
* button, silkscreen tweaks; gnd holeKevin Wallace2025-12-22
|
* rearrange button, silkscreen textKevin Wallace2025-12-22
|
* add ignition switch, label i2c pins. pin mapping complete!!Kevin Wallace2025-12-22
|
* add legend to silkscreen, re-add pads to unknown pinsKevin Wallace2025-12-21
|
* more compact layout, againKevin Wallace2025-12-21
|
* gnd viasKevin Wallace2025-12-21
|
* jlcpcb druKevin Wallace2025-12-21
|
* gitignore kicad fabrication toolkit outputKevin Wallace2025-12-21
|
* USB_A_Molex_105057_Vertical modelKevin Wallace2025-12-21
|
* flip D1 for more direct routing, mv USB_D- wiggle away from MT3608 undersideKevin Wallace2025-12-21
|
* more layout tweaksKevin Wallace2025-12-21
|
* mv C1 physically closer to 3V3Kevin Wallace2025-12-20
|
* MT3608 enable pinKevin Wallace2025-12-20
|
* unnecessary fiddlingKevin Wallace2025-12-19
|
* gnd viasKevin Wallace2025-12-19
|
* fix C1, C2 footprintKevin Wallace2025-12-19
|
* ground fillKevin Wallace2025-12-19
|
* add usbKevin Wallace2025-12-19
|
* rename known netsKevin Wallace2025-12-18
|
* swap pins 4&5Kevin Wallace2025-12-15
| | | | | (not strictly necessary since they're both PoE DC+, bridged on the pm3 side... but here we're pretending they're an ethernet differential pair)
* tracksKevin Wallace2025-12-14
|
* tracksKevin Wallace2025-12-14
|
* fillet, teardrop, diff pair wiggly bitsKevin Wallace2025-12-13
|
* let's not put these on the silkscreen, actuallyKevin Wallace2025-12-13
|
* holesKevin Wallace2025-12-12
|
* track cleanupKevin Wallace2025-12-11
|
* tweaksKevin Wallace2025-12-11
| | | | | * remove testpoints from schematic, switch to fat tracks in pcb solder mask * restore J1, J2 labels for PCBA
* add textKevin Wallace2025-12-11
|
* add proxdongl3 filesKevin Wallace2025-12-11
|
* initial commitKevin Wallace2025-12-11
generated by cgit v1.2.3 (git 2.25.1) at 2026-01-10 04:33:09 +0000