summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAge
* kicad project 3d view presetsHEADmasterKevin Wallace4 days
* smaller jigKevin Wallace4 days
* tighten gnd fill to .25mm, tweak traces, silkscreen legendKevin Wallace4 days
* change board shape from 17.5x55mm to 24.5x40.5mmKevin Wallace5 days
* jig edge dsub connnarrowKevin Wallace5 days
* fix jig pitch 2mm->2.54mmKevin Wallace6 days
* don't set vehicle or mounting plate numberKevin Wallace7 days
* automount mp_sd by label in addition to pathKevin Wallace9 days
* move usb port down a tiny bit for mounting plate clearanceKevin Wallace9 days
* pth thermal reliefs on gnd fill for better solderabilityKevin Wallace10 days
* 24LC64 decoupling capKevin Wallace10 days
* glasgow i2c eeprom programming jigKevin Wallace10 days
* fmtKevin Wallace10 days
* i2c eeprom flash scriptKevin Wallace12 days
* silkscreen, gnd viaKevin Wallace12 days
* i2c eeprom addr is 0x50 -> addrsel all gndKevin Wallace14 days
* add i2c eeprom. but what address???Kevin Wallace2025-12-24
* fix MT3608 footprint rotation to match jlcKevin Wallace2025-12-23
* button, silkscreen tweaks; gnd holeKevin Wallace2025-12-22
* rearrange button, silkscreen textKevin Wallace2025-12-22
* add ignition switch, label i2c pins. pin mapping complete!!Kevin Wallace2025-12-22
* add legend to silkscreen, re-add pads to unknown pinsKevin Wallace2025-12-21
* more compact layout, againKevin Wallace2025-12-21
* gnd viasKevin Wallace2025-12-21
* jlcpcb druKevin Wallace2025-12-21
* gitignore kicad fabrication toolkit outputKevin Wallace2025-12-21
* USB_A_Molex_105057_Vertical modelKevin Wallace2025-12-21
* flip D1 for more direct routing, mv USB_D- wiggle away from MT3608 undersideKevin Wallace2025-12-21
* more layout tweaksKevin Wallace2025-12-21
* mv C1 physically closer to 3V3Kevin Wallace2025-12-20
* MT3608 enable pinKevin Wallace2025-12-20
* unnecessary fiddlingKevin Wallace2025-12-19
* gnd viasKevin Wallace2025-12-19
* fix C1, C2 footprintKevin Wallace2025-12-19
* ground fillKevin Wallace2025-12-19
* add usbKevin Wallace2025-12-19
* rename known netsKevin Wallace2025-12-18
* swap pins 4&5Kevin Wallace2025-12-15
* tracksKevin Wallace2025-12-14
* tracksKevin Wallace2025-12-14
* fillet, teardrop, diff pair wiggly bitsKevin Wallace2025-12-13
* let's not put these on the silkscreen, actuallyKevin Wallace2025-12-13
* holesKevin Wallace2025-12-12
* track cleanupKevin Wallace2025-12-11
* tweaksKevin Wallace2025-12-11
* add textKevin Wallace2025-12-11
* add proxdongl3 filesKevin Wallace2025-12-11
* initial commitKevin Wallace2025-12-11